Installation de certificats SSL sur Juniper NetScreen ScreenOS 4.0 et 5.0
Copy and paste your SSL certificate
into a notepad file and save as your_domain_name.crt.
Save your root as TrustedRoot.crt
1) In the WebUI Options menu, select Objects and Certificates.
2) Load your SSL certificate:
Select the circle to load a 'Cert'. Next to 'Show' select Local. 'Browse' to your ssl certificate
emailed to you by SSL247 that you saved as your_domain_name.crt. Find it on your machine and hit “Load”.
3) Load the Root Certificate: Select the circle to load a 'Cert'. Next to 'Show' select CA. 'Browse' for the Root (TrustedRoot.crt) certificate that you downloaded and hit Load.
4) Verify that your SSL certificate loaded as a 'Local' certificate. The Root certificate should have loaded as CA certificates. If your SSL cert (the Primary certificate) has loaded as a CA certificate something is wrong. This usually happens because the domain is not properly setup on the device. To resolve this you will need to configure the domain name (see CSR creation instructions), create a new CSR for a new certificate, and install the certificate again.
The Certificate installation on your NetScreen Device is now complete.